Stepping Motor แรงบิด 1.3 N.m เหมาะนำไปใช้งานหมุนขับเคลื่อนแรงบิดที่สูงขึ้น
Driver TB6600 drive 4.0A
Spec
มอเตอร์รุ่น: J-5718HB3401
กระแส: 3.5 A แรงบิดออก: 1.3 Nm
ความยาวลำตัว: 53.5 มม. ความยาวเพลา: 20 มม
แกนเพลาเส้นผ่าศูนย์กลาง: 8mm / 6.35MM (ค่าเริ่มต้น 8MM)
โหมด Outlet: แกนเดี่ยว / คู่เอาท์พุท (แกนเดี่ยวเริ่มต้น)
สีสาย: (สีดำ A + สีเขียว A- แดง B + สีน้ำเงิน B)
สินค้าสต๊อกเมืองไทย ถ้าซื้อจำนวนเยอะสามารถต่อรองได้ทางไลน์ไอดีร้าน
สนใจติดต่อ line id: @vrautomation
ผู้นำเข้า และจัดจำหน่ายอุปกรณ์ไฟฟ้า สำหรับระบบอัตโนมัติ ระบบควบคุม สินค้าอุตสาหกรรม เช่น พีแอลซี จอทัชกรีน มอเตอร์ เซ็นเซอร์ สายสื่อสาร ต่าง ๆ เป็นต้น ร่วมถึงงานบริการด้านวิศวกรรมควบคุม
Mitsubishi Omron Samkoon Delta Panasonic Siemens ABB Mean Well Proface Weintek AMSAMOTION Fuji
Control signal connection:
PUL+ : Pulse signal input is positive.
PUL- : Pulse signal input negative.
DIR+ : Positive and negative motor control is positive.
DIR- : Motor positive and negative control negative.
ENA+ : Motor offline control is positive.
ENA- : Motor offline control negative.
Motor winding connection
A+ : Connect the motor winding A+ phase.
A- : Connect the motor winding A-phase.
B+ : Connect the motor winding B+ phase.
B- : Connect the motor winding B-phase.
Power supply voltage connection:
VCC : Power positive terminal "+"
GND : Negative power supply "-"
Note: DC DC range: 9-42V is recommended. Up to 50V, can not exceed this range, otherwise it will not work properly or even damage the drive.